Profoto’s Connect is a small disk-like device with a shoe that allows it to be slipped into a camera hotshoe. This enables it to communicate with the camera and trigger a Profoto flash such as the A1 when the shutter release is pressed.
It’s designed to be very simple to use and as a consequence has just 3 settings, auto, manual and off. These are selected by rotating the top section of the unit to the correct point.
In auto mode, the Connect fires the flash in TTL-mode. That means that the camera assesses and controls the exposure. Alternatively, in manual mode, you can control the output.
Thanks to Bluetooth connectivity, the Connect can link with an iPhone running the free Profoto app. This can then be used to adjust the flash output remotely.
Read More: Profoto A1 Review
Key Features
- Button-free trigger for all Profoto AirTTL lights
- Hotshoe mounted
- Wirelessly connection between camera and light
- Three settings: Auto, manual and off
- Smart connectivity with the Profoto app (compatible with iPhone 7 and later)
- Built-in rechargeable LiPo battery – 30-hour battery life
- Frequency Band: 2.4 GHz with 8 channels
- Range: Up to 300m (1000 ft) (free line of sight in open space)
- Diameter: 45 mm (1.77 in) Height: 29 mm (1.14 in)
- Weight: 43g
Build and Handling
The Profoto Connect has a slick, silky feel and slots easily onto a hotshoe. I used the Sony fit Connect, but it’s also set to be available for Canon, Fuji, Nikon and Olympus cameras.
It couldn’t be simpler to activate the Connect, you just rotate the top section to Auto or Manual depending upon which mode you want to use. It’s then easy to pair it with an iPhone running the free Profoto app to adjust the output.
I used the Connect to trigger a couple of Profoto A1 lights, one in Canon fit and the other in Nikon fit. As soon as the A1s were set to Air-TTL mode, the Connect started to trigger them when the shutter release was depressed.
As USB-C port is provided for charging and making firmware updates.
Performance
Whenever I turn on the Profoto Connect, it works flawlessly. It connects quickly to the A1 lights and fires them each time. The flash output also adjusts whenever I used the app or the camera’s controls to tweak it.
